Toolbars

Marquee has three different toolbars. If you are not sure about any tool’s function, position the mouse pointer on a toolbar button (without clicking). The tool is highlighted, and the Tool Tip display indicates the function:

The functions of the Toolbars are detailed below. Most of these functions have QWERTY keyboard equivalents.

Cue List Toolbar

The Cue List Toolbar is located directly above the Cue List on the left side of the display.

The Autoscroll button turns the Autoscroll Cue List function on and off . [S11] also toggles the pin.

The GO button (Console Equivalent: [GO], QWERTY Equivalent: [SPACE]):

activates the cue indicated by the Cue List Pointer in the cue's recorded time
advances to the next cue in the recorded time (activating any Cue Actions and executing any Follow Cues)

The HALT button stops any cue that are playing back on this cue list from running. Once the cue list has been stopped, hitting the Halt button again will backup to the previous cue in the default Cue List Back fade time (See [S2] Show Options). (Console Equivalent: [HALT/BACK] QWERTY Equivalent: [Z])

The Go Back button is equivalent to doing a Goto on the previous cue in its own cue time. (Console Equivalent: [SHIFT] [HALT/BACK] QWERTY Equivalent: [SHIFT] [Z])

The Step Back button replays the cue before the active cue in the default Step Time (See [S2] Show Options). (Console Equivalent: [STEP UP] QWERTY Equivalent: "[") Use with [SHIFT] to go to the top of a cue list.

The Step Forward button goes to the cue after the active cue on the default Step Time (See [S2] Show Options). (Console Equivalent: [STEP DN], QWERTY Equivalent: "]") Use with [SHIFT] to go to the bottom of a cue list. If a long fading cue is running, pressing this button will complete the cue in Step Time.

The Release Cue List button halts all cues on that Cue List and releases all fixtures controlled by that Cue List. (The fixtures will either return to their default levels, or to the levels set by any other Cue List or Look Master that has control of them. They will fade out using the Cue List's release time). (Console Equivalent: [REL-PB] QWERTY Equivalent: [\]) Use with [SHIFT] to release all cue lists.

The Goto Cue button activates the highlighted cue on the Cue List in the default time. (Console Equivalent: [SHIFT] [GOTO CUE], QWERTY Equivalent: [SHIFT] [Q] [#] [ENTER] - (Un-Check [S6]) Goto and Do Not Execute Follows)

The Goto and Run button fades to the highlighted cue in the recorded time. (Console Equivalent: [SHIFT] [GOTO CUE], QWERTY Equivalent: [SHIFT] [Q] - (Check [S6]) Goto and Execute Follows)

The Cue Properties button accesses the Cue Properties dialog box. (Console Equivalent: [VIEW] [CUE] [#] [ENTER] QWERTY Equivalent: [V] [F10] [#] [ENTER])

Fixture Grid Toolbar

When in Live mode, the levels you see in the Fixture Grid show what is being output to the stage. Any levels with a blue background are not controlled by the Selected Cue List. Get in and out of Live mode by pressing [SHIFT] [BLIND] or on the QWERTY keyboard with [B].

When in Blind mode, the Fixture Grid has a green background. See the pink Loaded bubble to see what is currently loaded in Blind. Get in and out of Blind mode by pressing [SHIFT] [BLIND] or on the QWERTY keyboard with [B]. See Blind. While in Blind, if you use the arrow keys to move the Blue Box, the highlighted cue will automatically be loaded. When you press [LOAD] or [SHIFT] [B], the Load dialog box will be automatically stuffed with the highlighted cue number.

When the Tracking button is down in Blind, the levels that have tracked into the Loaded cue are shown even though those levels are not recorded in the loaded cue. This button is only shown when in Blind.

The Record button accesses the Record dialog box.

Update will open the Update dialog box presenting a list of possible playback items to update.

Changes the Fixture and Attribute Grid displays to show Intensity Levels and Attribute Values. The Moving Light Attribute Grid (see below) must be displayed to see Attribute values such as Pan/Tilt and Color.

Changes the Fixture and Attribute Grid displays to show Wait/Fade Times. The keyboard shortcut to toggle between Levels and Times is [SHIFT] [EDIT].

The first click of the Release button release the last altered attribute. The second click releases selected fixtures and the third releases all captured fixtures

Turns on and off the display of the Moving Light Attribute Grid. See Display Menu.

Turns on and off the display of the Running Effects. See Display Menu.

Globally toggles Move In Black on and off.

Cue List Directory Toolbar

Use the Cue List Directory toolbar to switch between displaying Cue Lists, Patch and Time Events.