Many of a cue's properties can be set when you are recording the cue using the Record Cue dialog box. You can easily edited timing properties using the Blue Box in the cue list or other properties by editing the Action Column or you may want to adjust more than one property of the cue at once by using the cue's property dialog box. All cue properties are described here, including the ones found in the Cue Action dialog box.
To view a cue's property box, use the [VIEW][CUE][#][ENTER] syntax (or [V][F10][#][ENTER] on the QWERTY keyboard).
After hitting the [VIEW] button, the View dialog box will appear.
Note:
If you highlight the cue with the Blue Box then press [VIEW] [CUE] this dialog box will be pre-loaded with correct cue number.
You
can use either [S10]
or the [CUE] button to show you cue selection options.
You
can also highlight the cue with the Blue Box and hit the Properties button
in the Cue List toolbar.
Once you select Cue, the Cue Number edit box is active. Enter a number or use the wheel to scroll through the list of available cues. Use [S1] to change the cue list if you want to view cues that are not in your currently Selected cue list. When you have found the cue you want, press [ENTER]. The Cue Properties dialog box will appear:
Use the softkeys, move to any box and change the properties that you wish. To select a Profile, use the softkeys to select a Time field then press [NEXT] to move over to the Profile combo. When you are finished, press [ENTER].
Note:
You can change some of these parameters by moving the Blue Box to the Action column and pressing [EDIT] or [INSERT]. The Cue Action dialog box will then open:
See Also: