Use with [REL] to restore previously released fixtures. (NOTE: if Last Action Editing is on, [SHIFT] + [REL] will fully release any captured attributes.
Use with [EDIT] to enter the Times Display.
Use with [STEP UP/DN] buttons to go to the top or bottom of a cue list.
Use with [ARROW KEYS] to select a range of cells with the Blue Box.
Use with [PREV NEXT] to select the previous fixture to the current one -or - ...
Use with [PREV NEXT] in dialog boxes to move the focus of the current control.
Use with [GOTO CUE] to open the Goto Cue dialog.
Use with [GO] to assert the appropriate cue list.
Use with [BACK] to go to the previous cue in cue time.
Use with [MOVE COPY] to renumber cues or move Looks.
Use with [BLIND LOAD] to enter or exit Blind mode.
Use with [Highlight] for Lowlight.
Use with [UP/DOWN] to adjust the selected fixtures level by one percent.
Use with Split Crossfaders or Single Crossfaders (A/B C/D fader setup under [S3] Hardware Setup) to manually move backwards through a cue list.
When the command line is empty, holding down [SHIFT] and rolling the wheel will scroll the fixture grid.
Use after pressing [REC] and before pressing [BUMP] or [SELECT] or [5X5] to keep Record dialog box open for labeling or attribute masking.
Use with [THRU] for [Thru-On] syntax
When moving lights are selected, hold down [SHIFT] while double pressing [S1] through [S4] to add an Effect to the corresponding attribute